How to Install Mobile Home Skirting on a Manufactured Home

 
 
Mobile Home Skirting Installation is very important for your new mobile home. Skirting protects your mobile home against pests, as well as protecting it from the weather. Proper skirting installation will also keep out rain and snow. Skirting can be installed on wood, vinyl, and metal and comes in many styles, colors, and materials.
 
The average height of a mobile home skirting board is 48 inches. When installing, measure the outside perimeter of your foundation footer and the wall behind your home. This will give you the dimensions of the skirting that you need to install. Be sure to leave at least one foot of room to doorways and other openings.
 
The type of mobile home skirting installation you choose is completely up to you. There are many manufactured skirting materials to choose from. One popular style is manufactured on a wood frame with four wooden skirting boards on each side of the perimeter wall. The manufacturer uses glue to glue each piece together. Another popular style of mobile skirting is manufactured on metal frames with either brick or tile borders. These are more popular with condominium and townhome owners. Learn more on how to install mobile home skirting here.
 
When preparing to install your mobile home skirting installation make sure that you have all of the proper equipment. Equipment needed includes utility knife, nails, caulk, framing square, pencil, tape measure, framing square, drill, nails, tacks, hammer, measuring tape, pencil, floor scissors, tape measure, and roofing tar paper. Also keep in mind that you need to have at least two people to properly install your skirting. You will also need a friend or neighbor to help you hold down the snips while you install the tin snips.
 
When choosing the location of your manufactured home skirting board make sure you mark it so that you will be able to locate it once it is fully assembled. Mark the location on the underside of the roof as well as any other exposed sides of the roof. You may also want to mark around the door, windows, and any other accessible areas inside the mobile home as well. Once the entire mobile home skirting installation is ready to begin you should open all of the removable hardware in the walls and ceiling. 
 
Now you are ready to begin your mobile home skirting installation. Hold the tin snips by hand and pull them through the holes in the tins. Be careful to not cut into the metal frame. After you are done cutting you will be left with two long Duraskirts. For more knowledge about this topic, visit this link: https://www.ehow.com/how_8292221_paint-mobile-homes-vinyl-skirting.html.
 
This website was created for free with Webme. Would you also like to have your own website?
Sign up for free